Drop In Anchor1

Drop-in anchor is a structure consisting of a tapered inner cavity. Due to this, as the bolt is tightened, the anchor begins to expand. This allows the desired structure to be firmly attached to the wall. And due to the thread located on its inner part, it will be possible to easily screw various fasteners into it.

They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed.

Generally supplied in carbon steel with zinc-plated, zinc-plated steel screws resist corrosion in wet environments.

▪Material Available – Carbon Steel with zinc plated, Stainless Steel.

▪Custom Sizes - Our unique mass customization manufacturing operation allows us to customize sizes far more easily than any other provider.

▪Custom Finish - We can offer zinc plating, nickel plating, chrome plating, hot deep galvanized, a standard plasticized finish.

•The holding values of the Drop-In anchor are mainly dependent on the psi of the concrete and on the depth of embedment. Other factors include if steel rebar is in the concrete and on the full expansion of the Drop-In anchor.

•The Drop-In anchor has sides that are smooth to allow for more surface area to be in contact with the concrete, thereby providing consistent holding values.

Installation Instructions

•As with all female type anchors, the designated diameter of the Drop-In anchor refers to the side diameter of the anchor.

•The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete.

•Minimum embedment for each diameter of Drop-In anchor is the length of the anchor.

•The Drop-In Anchor requires the bottom of the hole to set the anchor.

•First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the Drop-In anchor is fully set.

Drop-In Anchor

Steel anchor for heavy duty fixing designed for structural fixing, of static type, on solid supports.

Item No.	Size	Inner metric thread	Outer anchor diameter	Sleeve length	Bag	Carton
		mm	mm	mm	pcs	pcs
DA 27001	M6X40	M6	10	40	100	100
DA 27002	M8X50	M8	14	50	100	100
DA 27003	M10X60	M10	16	60	100	100
DA 27004	M12X80	M12	20	80	40	40
DA 27005	M16X90	M16	25	90	20	20

Applicable scenarios

Drop-in anchor can be used for reliable fixation of large-sized equipment in brick, stone, concrete under moderate-heavy loads. Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. It is intended: For the construction of suspension systems; For installation of suspended ceilings; For laying cable routes; For hanging small loads.

Want to win the competition?

YOU NEED A GOOD PARTNER
All you have to do is contact us and we will provide you with solutions that will allow you to win against your competitors and will pay you handsomely.